Sale/Auction: APP PUMP

Make/Model:

Description:

 1.      Expanded AHLSTAR™ Process Pumps – Features and BenefitsAHLSTAR™工艺流程泵的特点和优势 2.      A double volute casing in larger AHLSTAR™ pumps reduces radial forces and shaft deflection.大型AHLSTAR™泵的双涡壳设计可以减少径向力和轴偏差。 3.      The self-venting, top centerline casing prevents air-lock in the top of the casing.泵体顶部中心的排气通道可以防止在泵腔顶部出现气囊。 4.      The sideplate is adjusted externally to maintain a constant impeller clearance and continuous high efficiency.外部可调的耐磨板能确保其与叶轮之间的间隙恒定，使泵持续高效地运转。 5.      ROTOKEY impeller mounting provides strong, reliable power transmission. It is self-locking and reverse rotation safe. ROTOKEY facilitates the installation and removal of the impeller. It is not sensitive to axial loads created during pump operation.安装叶轮的螺纹键可以提供强力可靠的功率传递。它具有自锁和反转保护功能，装拆方便，并且对泵运行时产生的轴向载荷不敏感。 6.      A hydraulicsA型水利设计 7.      Designed for pumping clean, abrasive or corrosive liquids especially stocks of various kinds.用于输送清洁、带有腐蚀或磨蚀性介质以及各种浆料。 8.      N hydraulicsN型水利设计 9.      Non-clogging process pumps are the right solution when the liquid contains large or long particles.无阻塞工艺流程泵用于输送含有大颗粒或长纤维的液体。 10.   W HydraulicsW型水利设计 11.   Wear resistant pumps guarantee reliable pumping when the liquid is very corrosive and /or abrasive.耐磨泵能保证可靠的输送具有强腐蚀性或磨蚀性的液体。 12.   A wide selection of shaft seals is available to meet the needs of each specific application. Dynamic seals and ready fitted mechanical seals fit all requirements.可供选择的多种轴封形式能满足各种特定工况。动态密封和半集裝式机械密封适用于所有的密封要求。  Page 5 1.    Self Priming SS型自吸设计 2.    Self priming pumps with internal vacuum pump are designed for self priming purposes and to pump gas containing liquids.带内置真空泵的自吸泵是为自吸而设计的，并用于输送含气液体。 3.    Bearing unit轴承组件 4.    Simplified heavy-duty bearing unit design ensures reliability.标准化的重载轴承组件确保可靠性。5.    Grease lubrication油脂润滑 6.    Temperature of pumped liquid max.120℃输送液体温度最高可达120℃ 7.    Oil Lubrication油润滑 8.    Temperature of pumped liquid max.180℃(EPP 210℃)输送液体温度最高可达180℃（EPP 210℃） 9.    Heavy-duty shaft. Deflection at stuffing box less than 0.05 mm. High strength duplex stainless steel is standard shaft material.重型轴在填料函处的偏差小于0.05mm。其标准材质为高强度双相不锈钢。 10. Non-contacting bearing protection for the combined advantages of labyrinth ring, deflector and lipseal. lipseal protects in standstill position.非接触式油封结合了迷宫油封、防尘盘和唇形密封的长处。在停机时唇形密封起保护作用。 11. Strong and rigid bearing support foot improves mounting stability and maintains solid support.坚固的轴承支脚增强了安装稳定性，并维持稳固的支撑。 12. Jackscrews for simple disassembly.顶丝孔简化拆卸过程 13. Air Separating RR型除气设计14. Air separating pumps with external vacuum pump are particularly applicable for pumping gas containing liquids.带外置真空泵的除气泵特别适用于输送含气液体。 15. Others其他 16. AHLSTAR™ hydraulics are utilized also in NVP Non-Clogging Vertical Process Pumps and NKP/WKP Non-Clogging Cantilever Pumps.AHLSTAR™水利设计同样被应用在NVP型立式无阻塞工艺流程泵和NKP/WKP 悬臂式无阻塞泵上。 17. EPP Hot Liquid Pumps for industrial processes where the system pressure is high and pressure or temperature strokes occur.EPP型蒸煮泵适用于高压系统和具有压力或温度冲击的工艺工况下。

Capacity

• Speed:

  3600L/MIN

Product Sizing:

Price

• Asking:

  $10000

• Minimum Acceptable:

  $8000

File / Drawing: