3 Guests are online
Total Listings: 1116
Sale/Auction: Sulzer Travaini PMZF Vacuum Pump - New or Rebuilt
Send an email to sales@papermillsurplus.com to inquire about this item.
Make/Model:
Sulzer Burkhardt Model PMZF 3810Description:
Sulzer Burkhardt Apovac Vacuum Pump Model PMZF 3810 D2
Made by Pompe Travaini-NSB
SS Body Construction
Unit is unused or rebuilt
Motor Needed: 11/13.2
Speed: 1000
Ring Liquid Flow: 2000 L/H
MR: 51245
Year 1988
Weight With Motor: 430/470
Noise Level: 76
Inlet: DN80
Outlet: DN80
Cavitation Protection: 1/2"
Ring Liquid Pipe: 1/2"
Over Flow: 1/2"
Features and Advantages:
Sturdy
Cold Compression
Not Sensitive to impurities nor liquids
Conformity with Atex
With Mechanical Seal
IEC Motors
Low Power Requirement
Low Ring-Liquid Requirement
Simple Concept
Quiet Running
Low Maintenance
Self Priming
Safe Operation
Simple Installation
| PMZF / PMZK | |
| Capacity Range: | 150-600 m3/h |
| Pressure Range: | 40-3000 mbar |
| Material code: | D / H |
| Shaft seal: | single mechanical seal |
| Execution: |
Types
PMZF/K 2507 to 3817
Liquid Ring Pump for
Vacuum
Single-step standard pump for vacua
down to 40 mbar
(6 mbar with gas ejector),
Suction property from 150 up to 600 m³/h
Overpressure up to 2.5 bar abs
Pump and motor are flanged to a support, so that a base frame is not necessary. Drive is by means of a directly coupled, flanged motor to IEC standard. Motors to other standards can be connected by means of an adapter flange. Shaft sealing with
single-acting mechanical seal acc. to DIN 24960 (exept Code 1)
Accessories you can add:
Non-return valve (2)
Gas ejector (3)
For pressure down to 6 mbar abs.
Liquid separator (4)
Polypropylene or stainless steel
Economy circuit
(5)
With the economy circuit, combined with
liquid separator, the consumption of ring-
liquid can be reduced, up to one half
of its normal quantity, depending on the
required vacuum.
Automatic ring-liquid control (6)
consisting of regulating valve, pressure
guard, solenoid valve and stop valve.
Drain valve (9)
| PMZF / PMZK | |
| Capacity Range: | 150-600 m3/h |
| Pressure Range: | 40-3000 mbar |
| Material code: | D / H |
| Shaft seal: | single mechanical seal |
| Execution: |
Liquid-ring pumps for vacuum or compressor duty
Types PMZF/K 2507-3817
Single-step standard pump for vacua down to 40 mbar (6 mbar with ejector),
Suction property from 150 to 600m3/h
Overpressure up to 2.5 bar abs
Features and advantages
•Sturdy
• Cold compression• Not sensitive to impurities nor liquids
• Conformity with ATEX
• With mechanical seal
• IEC motors
• Low power requirement
• Low ring-liquid requirement
• simple concept
• Quiet running
• Low maintenance
• Self-priming
• Safe operation
• Simple installation
.jpg "AUMA SG05.1 (Pic1).jpg")
