3 Guests are online
Total Listings: 1117

Categories

welcome!

Register an Account or

What would you like to do?

Sale/Auction: Former Wausau Paper Mill Liquidation

Send an email to sales@papermillsurplus.com to inquire about this item.

Make/Model:

 GL&V 189" Trim Machine

Description:

 

 

Giant Paper Mill Liquidation - Two Rebuilt Paper Machine Lines, Late Style Finishing lines including two Bielomatik Folio Sheeter Lines,  Two Will Sheeter lines with carton and wrapping, 4 Late Style Super Calendars with Jagenberg Vari-Dur, Machine shop with Leblond and Farrel Grinders, Great choice of Lab equipment, Spare pumps, Motors, Valves and tons of spares with 1000's of items Available!

Machinery Available

 PM 7 Machine
This machine has restrictions and can't be used in any color or specialty applications or sold to any competitors of Wausau Paper.

The existing paper machine was manufactured by Beloit and installed in 1958/1959. It was rebuilt in 1997 and in 2011 with over $50 million in rebuilds.  It has a new 202” BTF dilution headbox slice, runs a 206” Fourdrinier wire, and trims a 186” sheet at the reel.  Balance speed of the machine is 2000ft/min.  The current production information is as follows:

2011 Rebuilds

 Headbox & approach flow


Fourdrinier widened


Press


2 uni-runs


Cognex


Rebuilt finishing stack


 3 Under machine pulpers


Dryer drainage
 
Paper grade:                                   Free Sheet - Fine Printing Paper
Furnish:                                                50-100% hardwood (aspen & maple)
                                                           0-60% softwood
                                                           10-20% PCW
                                                           30-60% broke
·         Sheet Weight:                           22lb–147lb/3300 sq. ft.
·         Production (Average):           325 TPD               
·         Moistures:                                  1% headbox consistency
                                                           65-70% moisture into press
                                                           55-65% moisture into dryers
                                                           0.5-1.5% moisture into the size press
                                                           3-5% moisture at reel
 
BTF Headbox with Honeywell Automatic Dilution Control
New in 2011
 
Basis Weight range & grade type: P&W 50.2 – 146 (lbs. /3300 ft2)
Other 19 – 28.4 (lbs. /3000 ft2)
Design headbox consistency: 0.2%-0.88%
Retention (average): 86% – 92%
Furnish: Swk, Hwk, Hpz
Forming fabric width: 206 in.
Pond width: 202 in.
Trim width at reel: 181 – 189.5 in.
Distributor size: 1100 mm
Distributor max. Flow: Max. 13,200 USGPM
Headbox max. Flow: 11,095 USGPM
Slice vertical adjustment: 0.25 in. – 3.00 in. (Approx.)
Slice horizontal movement: +/- 0.63 in. (Approx.)
Dilution control: By Honeywell, 66 zones
Dilution water flow: 590 – 1110 USGPM
Machine design speed: Max 2,000 FPM
Hand of machine: Standing at the Headbox looking toward
The reel, drive is left
 
 
 
 
HEADBOXES LEADING DIMENSIONS
BASE SHEET HEADBOX:
Headbox overall height: 77 in.
Headbox overall length (CD): 63 in.
Headbox overall width (MD): 216 in.
Pond width: 202 in.
Distribution hoses diameter: 2.0 Inch
Number of distribution hoses: 66
Maximum temperature: 180 °F
Maximum design speed: 2,000 FPM
 
Fourdrinier
 
Beloit roll-out Fourdrinier with a 206” wire.  It includes a Beloit breast roll shake, a forming
board, (7) 4-blade foils, (3) low-vac boxes, a 60” diameter dandy roll, and (3) high-vac flat boxes. 
The centerline of breast roll to couch roll is 646”.
Rebuilt in 2011
32" φ x 208" face width rubber covered (3/8") breast roll complete with steel shell, cast iron heads, stainless steel journals, balanced to 2500 FPM, bearings, Inpro seals, bearing housings, mounting pads to the existing Fourdrinier framing and a new doctor.
(b) Seven (7) new 20" φ rubber covered wire returning rolls, 208" face, including the wire stretch and wire guide roll complete with steel shell, cast iron heads, stainless steel journals, balanced to 2500 FPM, bearings, Inpro seals bearing housings and mounting pads or brackets.
(c) Modifications to the existing wire guide, wire stretch and wire return roll doctors, with adapter places, lever arms, turnbuckles and mounting brackets, as required, to accommodate the wider face width wire return rolls
 
Press Section
Rebuilt & redesigned in 2011
 
Suction pick up roll, 26” diameter Beloit
1st press, 36” suction & 36” smooth Beloit. Configuration: double felted 200 PLI,
New 2nd press nips with the Bi nip suction roll at 300 PLI and double doctored. The press is double felted with a bottom tandem felt extending through the 1st and 2nd press
The 3rd press consists of a Bi nip press roll is designed to nip with another fixed crown roller at 400 PLI (now removed due to proprietary design) The Bi-nip suction roll is 44” diameter with 3 vacuum zones, 2 nipped and one holding zone. The press is top felted with the felt extending through the 2nd and 3rd press.
The press has the ability to run a 200" (maximum) sheet width through the press section.
There is a steam box between the first and second press that has the ability to profile in 6 zones.
The press showers consist of 3 Albany 2000 series lubrication showers and 3 Albany 2000 series high pressure cleaning showers on 3” centers. The electromechanical shower oscillators are Albany EMO-3 series.
 
 

Dryer Section

 
Uni-Run Dryer Section
 
The Uni-run consists of (3) Bottom felted dryers and (3) top felted dryers, each driven by a 100 HP AC electric drive. An Enerquin Synervac suction box id designed to keep the sheet drawn to the felt between the dryers.
Bottom felted dryers 1 & 3 are new 2011 GL&V 60” diameter coded pressure is 150 PSI and have a Plasma hard coat. Dryer 2 is a Beloit 60” dryer Coded for 75 PSI.
The top felted dryers 4, 5 &6 are Beloit 60” diameter dryers and coded for 75 PSI.
 
Main Dryer Section
 
The main dryer section consists of (2) separate drive sections.
 Dryers 7 – 22 are 1st section driven from the line shaft with electric variable speed inching drive. The dryers are Beloit 60” diameter 200” face rated at 75 PSI steam. The dryers are gear connected in an enclosed lubricated gear case.
Dryers 23 – 36 are 2nd section driven from the line shaft with electric fixed speed inching drive. The dryers are Beloit 60” diameter 200” face rated at 75 PSI steam. The dryers are gear connected in an enclosed lubricated gear case.
 
Dryer Section
 
Uni-Run Dryer Section
 
The Uni-run consists of (3) Bottom felted dryers and (3) top felted dryers, each driven by a 100 HP AC electric drive. An Enerquin Synervac suction box id designed to keep the sheet drawn to the felt between the dryers.
Bottom felted dryers 1 & 3 are new 2011 GL&V 60” diameter coded pressure is 150 PSI and have a Plasma hard coat. Dryer 2 is a Beloit 60” dryer Coded for 75 PSI.
The top felted dryers 4, 5 &6 are Beloit 60” diameter dryers and coded for 75 PSI.
 
Main Dryer Section
 
The main dryer section consists of (2) separate drive sections.
 Dryers 7 – 22 are 1st section driven from the line shaft with electric variable speed inching drive. The dryers are Beloit 60” diameter 200” face rated at 75 PSI steam. The dryers are gear connected in an enclosed lubricated gear case.
Dryers 23 – 36 are 2nd section driven from the line shaft with electric fixed speed inching drive. The dryers are Beloit 60” diameter 200” face rated at 75 PSI steam. The dryers are gear connected in an enclosed lubricated gear case.
 
 
Size Press
 
New in 2004
 
The size press is a Nekoosa inclined puddle press rated at 25-175 PLI with 1 soft 33.25” diameter roll and 1 hard 32.25” diameter roll x 207” roll face. Each roll driven by a 100 HP AC drive. The size press is followed by a TEC floatation air turn.
 
After Dryer Section
Dryers 37 – 51 are 3rd section, driven from the line shaft with electric fixed speed inching drive. The dryers are Beloit 60” diameter 200” face rated at 50 PSI steam.  Dryers 37-40 are controlled individually and dryers 41-51 are controlled top and bottom split for curl control. The dryers are gear connected in an enclosed lubricated gear case. The after section was upgraded to Dublin stationary siphons and controls in 2004.
 
 
Andritz / Kusters
Modernized in 2011
 
PrimeCal hard 2 roll calender with deflection control roll and a Peritherm counter roll. Neither
Roll has a synthetic coating, the rolls are hard nipped for pre glazing of coating or finish glazing.
 
Paper web: 115-200g/m2, 70.1-123lb. /3000 ft2
Web width: 4674 min., 4852 max, 184” min 191” max
Paper tension: 0.70-1.08 N/mm, 4-6.2 PLI
Roll face: 5232mm, 206”
Line force: 8-150 N/mm, 46-857 PLI
Speed Construction & balance: 915m/min, 3000 fpm
Speed production: 400-900m/min, 1312-2952 fpm
Peritherm surface temperature: 120oC, 248oF
 
 
 
Reel
Beloit reel with a 36” diameter reel drum capable of 80” paper rolls.  A Valmet Reel spool storage/indexing system installed in 1995.
 
 
Winder
Valmet Wind Drum, two-drum winder designed for 8000fpm.  Unit includes (15) pairs of slitters with automatic positioning, a core loading system, and Reliance VFD drives with RGU drive upgrade in 2007.  The winder was installed in 1995.
 
 
 Machine Drives
The machine line shaft driven by a line shaft powered by a 1650 HP Worthington steam turbine.  Individual drives are Beloit differentials and transfer cases with PIV’s for draw control.  There are AC electric drives on the Fourdrinier shake, the couch and wire turning rolls, the press section, The Uni-run and winder and DC electric drives on calendar.
 
Steam Turbine
Worthington non-condensing steam turbine1650 HP S/N 21503. R.P.M. 4656/1000    Rotation: clockwise    Steam pressure: 575 PSI    Temperature 725 F
Note: 4656 is max rotor speed at 1000 RPM line shaft speed and 2000 FPM paper speed with P.I.V. units in the dryer section centered. The steam turbine now drives only the dryer section and the reel due to the addition of electric drives.
 
 
Stock Prep
 
Refiners
 (All 3 units) Remanufactured by SP Engineering in 2012
2 ea. Beloit – Jones 38”DD Series 4000 Double-D Refiner Hi-Flow refiner with floating splined 38” diameter rotor.
4.5% consistency 3000 GPM hydraulic capacity. Inlet outlet: Stainless steel, casing liner: Stainless steel, Disc rotor: Stainless steel, Sliding head: Stainless steel, Shaft sleeve: 304 with Nickel-Boron, Packing gland & nut: Stainless steel.  Motor 2300V synchronous 1000 HP @514 rpm
1 ea. Beloit – Jones 38”DD Series 4000 Double-D Refiner Hi-Flow refiner with floating splined 34” Reduced diameter rotor.
Disc rotor: Stainless steel, Sliding head: Stainless steel, Shaft sleeve: 304 with Nickel-Boron, Packing gland & nut: Stainless steel.  Motor 2300V synchronous 800 HP @600 rpm
 
Cleaners
Celleco 350 series centrifugal cleaner system utilizing four stages with (96), (56), (20) and (6) cleaners respectively and a reject control unit as the final stage.
 
Screens
New in 1994
 
Fiberprep 0.010” slotted screening system utilizing two 1500sph screens for the primary stage; and a 1000spm, 600spm, 400spm, and a Celleco vibratory screen for the proceeding stages.
 
Fan Pump
New casing and rebuilt rotating element in 2010
Gould’s double suction pump 24 x 20 -20 low pulse rotor, up to 21,000 GPM with a VFD 600 HP Motor. 
 
 
Machine Pulpers
 
Press Pit Pulper: Model 3696 UTM shark pulper, continuous with 44” IE impeller. Motor 400 HP 1170 rpm with belt drive.
 
Size Press Pulper: Bolton Emerson 36” Tornado pulper, 17-4 ph stainless steel rotor and stator, 316 SS outlet chamber. Motor 400 HP 1170 rpm motor and belt drive w/ jack shaft arrangement.
 
Reel Pulper: Bolton Emerson 36” Tornado pulper, 17-4 ph. stainless steel rotor and stator, 316 SS outlet chamber. Motor 400 HP 1170 rpm motor and belt drive w/ jack shaft arrangement.
 
Winder Pulper: Valmet twin agitator shark pulper. Motor 150 HP each
 
 
Vacuum System
 
Fourdrinier low-vac boxes: Hartzell stainless steel Vacuum Exhauster
Fourdrinier flat boxes: Nash CL-1501 and Nash K-6 vacuum pumps
Press Section uhle boxes :( 2) Siemens Elmo-F vacuum pumps
Couch and press suction rolls :( 5) Nash H-11A lineshaft vacuum pumps driven by an 1800hp Elliot
steam turbine.  A 900hp motor/generator either drives the lineshaft or generates power determined by the demand of the turbine exhaust steam.
The Bi-Nip suction press roll is supplied vacuum by a New Somarakis (2011) SV-4440-2 vacuum pump and driven by a 400 HP electric motor.
 
Dryer Drainage System
 
The steam and condensate system was completely replaced in 1995 and again upgraded in 2011 with a Fulton System Design and new Johnson joints sized for an approximate 40,000 lbs. /hr. evaporative load. The system has the following dryer groups to control dryer pressures separately:
Dryer 1:           0-150 psi (individual dryer can pressure control)
Dryer 2:           0-75 psi (individual dryer can pressure control)
Dryer 3:           0-150 psi (individual dryer can pressure control)
Dryer 4:           0-100 psi (individual dryer can pressure control)
Dryer 5:           0-75 psi (individual dryer can pressure control)
Dryer 6:           0-75 psi (individual dryer can pressure control)
Dryers 7-12:    0-50psi
Dryers 13-22:  0-75psi
Dryers 23-36:  0-75psi
New Deublin stationary siphons and joints were installed in 2004 for the 15 dryers in the after section.
Dryers 35-39:  -2 to 10psi (individual/group dryer can pressure control)
Dryers 40-50: 0-50psi (top and bottom dryer can pressure control)
There are (6) separators that transfer condensate to one collection tank, which then pumps through the building make-up air heat recovery coils to the boiler room.



Hood and Air System
 
The paper machine dryer hood and air supply/exhaust system was replaced in 1995 with a modern Valmet Enerdry System.  It includes the following:
Modular high humidity hood designed for an excess of 1100 grains humidity.
Pocket ventilation system with (30) pocket ventilators and (2) Northern Blowers designed for 74,000cfm at 180F.
Hood exhaust and heat recovery system consisting of (4) Northern Blowers designed for 136,000cfm total exhaust.  Each exhaust plenum includes air to glycol plate coils to recovery heat for the building air glycol system, Fans and heat exchangers constructed from 316SS.
Building make-up air system with a glycol heating station and (6) Northern Blowers to supply 385,000cfm of air to Building #43.
 
 
Paper Machine and Process Control
 
A Fisher Provox system controls and/or monitors all components of the paper machine.  It utilizes three 500pt controllers and one 320pt controller.  These controllers interface with the Measurex gauging system and Allen Bradley PLCs.  Operator interface is done using two Fisher six user OWPs for Provox control and MSX entry windows.  Archiving is done using a 5000pt PI system.
The Measurex system controls several machine functions, such as basis weight, machine speed, dryer pressures, etc.  There are two Measurex cross-machine scanners, one before the size press and one before the reel.
The ABB color scanning system also interfaces between the ABB work station and processing center and the Fisher Provox. This uses an ABB SP-1200 (7) meter scanner “O” frame before the calender stack where top and bottom Mcbeth color head sensors control the dye additive system.
 
The balance of the paper machine controls are either electric or pneumatic and are operated from standard bench boards or control boxes, as originally furnished with the equipment or updated based on machine modifications.
 
Additions:
Projet felt cleaner, Cognex camera system,  ABB high speed cameras, Calcoil Profiler on The Andritz Prime Cal. And the NDC optical moisture sensors
 
There are restrictions on this machine. We have an engineer on site to answer any of your questions.
PM 5 Machine
 Installed in 1917
 Rebuilt in 1978
 Top wire former 1991 – excellent formation
 Trim 116”
 Speed 600 fpm thru 1200 fpm
 Basis weight range – 70-240 lb /3000ft2
Uncoated freesheet and coating bases
 Tremendous site benefit to restart

Roll Wrap

§Minimum diameter is 30”, maximum diameter is 58”
§Minimum width is 11”, maximum width is 76”
§Rolls larger or smaller are hand wrapped.
§Semi-automatic Lamb wrapper.


Bielomatik Folio Sheeters

#3 Folio Sheeter - Bielomatik P1085/46 installed in 1986
With Carton Line
(4) Monomatic shaftless flying splice pick-up type backstands
Roll Sizes: 60" max diameter. 8500# weight limit; 30" to 83" wide
Finished Sheet: 20" to 50" long, 17" to 81" wide
Ream Height: 2-1/2" to 10", core diameter: 3: & 5" I.D. fiber cores
Max Speed: 1000 ft/min, Power requirements: 460V 3Ph, 60 HZ
Involvo model C-5A automatic folio cartoning machine with Lithibar Matik Palletizer
 
#4 Folio Sheeter - Bielomatik P1085/100 installed in 1990
(4) Monomatic shaftless flying splice pick-up type backstands
Roll Sizes: 60" max diameter, 8500# weight limit, 22" to 84-5/8" wide
Finished Sheet: 20" to 63" long, 17" to 82-5/8" wide
Double Plier - max height 72", core diameter: 3", 5" and 10" I.D. Fiber Cores
Max Speed: 1150 ft/min, Power Requirements: 460V, 3 Ph, 60 Hz



Finishing Room Equipment Specifications:
 
1.  #1 Folio Sheeter:  Bielomatik Sheeter installed in 1989, maximum width 64”.  Top speed is 1,000 ft/min, or 350 m/min.  Knife load is 389 lbs. per 3,000 ft.2, or 600 g/m2.  Size range is Width =17.5” to 43” any wider results in jogging problems, Length =22.5” to 60” minimum and maximum range for knife rotation. Maximum roll diameter is 59”.  Sheeter is equipped with 2-layboy-exchange system that results in continuous running.  Automatic size change for knife and slitter section, semi automatic for the layboy section.  All roll changes at 6-pocket backstand are manual.  Air Supply required is 85PSI.  Power Supply is 480V, 60Hz, 3 Phase.
 
 
2. #2 Folio Sheeter:  Jagenberg Synchro-Star Sheeter installed in 1994, maximum width of 65”, minimum roll width of 22”.  Top speed is 1,000 ft min., or 350 m/min.  Knife load is 400 lbs. per 3,000 ft2, or 600 g/m2.  Size range is Width =17” to 65”, Length =17” to 65”. Maximum roll diameter is 60”.  Sheet length accuracy is +/- 0.020”; squareness is 0.020” (measured on a sheet length of 40”).  Sheeter is equipped with a single layboy Palettomat exchange system; all size changes at the 4 pocket backstand and knife and slitter sections are automatic.  Layboy size changes are manual.  Air pressure required is 85 PSI.  Power Supply is 480V, 60 Hz,
3 Phase.  Power Requirements: Sheeter and Drive is 500 A, and the Controls is 150A.
 
 
3.  Involvo:  Involvo Folio Sheet Carton Pack Line/Columbia Palletizer installed in 1990, Schneider De-Stacker installed in March 1996.  Schneider/Function Control sheet count camera system installed 2005. Involvo carton pack line maximum capacity of 4 carton per minute or 240 cartons per hour.   Automatic Size changes, and automated hot melt glue system.  Paragon labelers upgraded in 2005.  Manual size changes at Columbia Palletizer.  Power Requirements: Involvo/Schneider Destacker/Columbia Palletizer: 460V AC, 60 Hz, 3 Phase.  Control Voltage: 120 V AC, 60 Hz., 24V DC.
 
 
4.  Acme:  Acme/Signode Skid Wrap Line.  11 Station/2 Signode steel strap head Acme skid wrap line.  Upgraded to steel strap heads in 1992.  Power Requirements:  480V, 60Hz., 3 Phase.
 
 
5.  Polar Trimmer:  Polar Model 155E, installed in 2004, cutting width 155 cm/61”.  Clamp opening 16.5 cm/6.5”.  Feed depth 155 cm/61”.  Automatic in feed gripper/Automatic out feed de-stacker.   Supply voltage 190-240V, Fusing 35A.
 
 
6.  Lawson Trimmer: Lawson Pacemaker 111 Cutter installed 1974.  Cutting width 69”/172.5 cm.  Clamp opening 6.5”/16.5 cm.  Feed depth 78”/195 cm.  Manual generic de-stacking table, manual Southworth un-stacking discharge table.  Power Requirements: 480V, 60Hz., 3 phase.
 
7.  Jagenberg Vari-Roll Single Drum Rewinder:  Installed in 1990.  Backstand specifications: Minimum/Maximum roll width 12” to 95”.  Minimum/Maximum roll diameter 20” to 60”, Load capacity of stands 13,200 lbs.  3 and 5” core chucks.  Power Requirements:  480V, 60Hz., 3 Phase, Control Voltage 120 V AC. 
Winder Specifications:  Machine slits and rewinds various grades of paper with a basis weight between 58-165 grams per square meter.  Maximum operating speed is 2286 m/min, Maximum unwind diameter 2667 mm, maximum rewind diameter 1500 mm, 6 Slitters, diameter of center drum is 985 mm.  3 Rewind stations.  Power Supply: 480V, 60 Hz.

EC Will Sheeters

(2) Will 8 pocket Cutsize Sheeters with shaftless backstands and full cartoning line includes:
Pockets Across:      #3W 8 pocket        #C4  8 pocket
Max Width Trim:      #3W 68                  #C4   68
Min Slit Width:         #3W 8-1/2             #C4   8-1/2
Max Slit Width         #3W  11                 #C4   14
Pref Edge Trim       #3W   3/4               #C4   3/4
Core Chucks          #3W  3,5,6             #C4   3,5,6
Cutsize for Palletizing and Packaging
Full Cartons           #3W  135               #C4   135
1/2 Carton              #3W  60                 #C4   60
Max Cutsize Tons per 24 hours    #3W 135    #C4  135


Super Calendars/Jagenberg Winder

Max Roll Width 93"
Pref Edge Trim at Jagenberg

Brainerd Additives and Starch Systems

§Three mineral systems with ratio control to PM.  Rail or truck delivery. (was GCC, PCC and TiO2).
§Wet End starch system with super sack delivery, including cooker and storage tank.
§Size press starch system including starch silo with rail unloading, cooker and storage tank.
§Silica drainage aid system with ratio control.
§Alum system for improved retention and drainage with ratio control.
§Micro Polymer retention system with trump jet style injection quill.
§ASA system.
§Surface size systems at size press.
§Five thick stock dye delivery pumps of various size for heavily colored grades.
§Dual thin stock dye systems for quick change with 22 tanks and ABB reel scanner color control feedback.
§Dual size press color system for quick change with two side sheet bias control.
§Dye fixative delivery system.
§Bulk wet strength system.
§Bleaching system to 14’ hydrapulper with exhaust hood.
§Bulk caustic tank.
§Bulk Sodium Hypochlorite tank.


§Receive pulp by rail or truck
§5 UTM pulpers that are fully wet strength capable.
§The paper machine is equipped with two separate broke systems to process cured wet strength broke independently from uncured wet strength broke.
§Broke system is equipped with 3 deflakers to eliminate broke flakes.
§3 off machine pulpers, 2 – 5 ton pulpers utilized for HW, SW, PCW etc.  1 – 1.5 ton pulper rebuilt in 2012 to be more aggressive and safe to utilize bleach.  The pulper  is utilized for wet strength broke rework and bleaching colors.
§Stock prep area is equipped with a de-wiring line for baled pulp.

 Bulk Sodium Hypochlorite tank.


§Stock prep area is equipped with two guillotine systems for cutting broke rolls efficiently.
§The refining system consists of 1- 800HP DD softwood refiner,1- 1000HP DD hardwood refiner and 1- 1000HP  DD central refiner.
§B7 is equipped with 4 independent fiber systems (not including broke) each of which can be ratio controlled to the PM for precise furnish control.
§Four stage thin stock screening system on PM
§Five stage centrifugal cleaner system on PM
§Screening and cleaning system yields very clean sheets.

Steam Generation Boilers
 
#1 Boiler
Manufacturer – Erie City
Estimated Build Date – Mid 1970’s
Purchased from another party and installed at mill in 1987
Steaming capacity – 70,000 #/hr at 170 psi,
Fired with natural gas


#2 Boiler
Manufacturer – Combustion Engineering
Built in 1945
Coal fired
Spread stoker, drop grate
Steaming capacity – 45,000 #/hr at 200 psi


#3 Boiler
Manufacturer – Babcock & Wilcox
Built in 1957
Steaming capacity – 75,000 #/hr at 600 psig, 750 degrees F
Coal or Gas Fired
·Coal – spreader stoker, traveling grate
·Gas – Peabody Burners (4)


#4 Boiler
Manufacturer – Babcock & Wilcox
Built in 1957
Steaming capacity – 75,000 #/hr at 600 psig, 750 degrees F. 
Coal or Gas Fired
·Coal – spreader stoker, traveling grate
·Gas – Peabody Burners (4)

There are also a lot of spare motors, pumps, gear reducers, machine parts, screen parts, refiners parts, valves, pumps and valves throughout the mill.

It has a great carton palletizer line at the end of the sheeters.

Nice balemaster balers, great array of Leblond lathes/grinders and a really nice Farrel roll grinder.

Has a lot of transformers, has some nice spares like a rebuilt 38 inch Beloit DD 4000 refiner, a Number 3 pulper Drive, Nash Vacuum Pump, etc.

Has some nice salvage rewinders, core cutters.

Had some nice pulpers.

The sheeters and finishing line is all new or rebuilt and is the best I've seen.

 

Contact me for a site visit. The mill is located in Brainerd, MN. Only two hour drive from MSP airport.

Video Not Available

©2007 Paper Mill Surplus